FEATURES:
Add network connectivity to your system.
This network interface card offers 10/100 Mbps operations.
This card plugs easily inside your PCs available PCI slot and lets you network with other PCs and connect to a Broadband, Cable, or DSL network.

SPECS:
Integrated Gigabit Ethernet PHY and MAC functions; Full/half-duplex and 10/100/1000 Mbps triple-speed operations support
IEEE802.3ab Auto-Negotiation support
Automatic detection and correction of cable pair polarity, along woth Auto MDI/MDIX cable crossover or pair swap detection
IEEE 802.3x compliant flow control support for full-duplex operation;Collision-based back-pressure support for half-duplex operation
IEEE 802.1p Priority Queuing support with 4 classes of priority queues
IEEE 802.1Q virtual LAN(VLAN) support with 63 BLAN tags
64KB deep on-chip Rx and Tx packet buffer
IPv4 TCP, IP and UDP checksum off-loading capability over Rx and Tx
IPv4 TCP segmentation off-loading capability over Tx
Jumbo frame support up to 16KB
Adaptive interrupt
Ring type packet-descriptor management circuit; Support multiple packet-descriptor fetching in a single burst
Entering Power Saving mode by automatic link speed switching from 1000Mbps down to 10 or 100Mbps in standby
Wake-up from Pre-ACPI and AbnormalShut-Down
Hardware and sofrware counters support for traffic statistics gathering
DMI 2.0(Destip Management Interface), WfM 2.0(Wirec fo management) compliant
Advanced packet filtering
Provide analysis tooling for 1000Base-T type ling over its link quality, cable diagnostics, cable loss, return loss and NEXT loss
One built-in RJ-45 connector
Two LED indicators: Link/Activity
PCB Size: 120mm X 47mm
Driver supprot for: MS Widow server 2003/XP/NT/ME/2000/98SE, Read Hat Linux 7.3(kernel 2.4.18-3) or later, Novell Netware 4.2/5.x/6.x/ODI 1.11